home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19970929-19971216
/
000105_news@newsmaster….columbia.edu _Wed Oct 15 15:22:00 1997.msg
< prev
next >
Wrap
Internet Message Format
|
1997-12-15
|
2KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id PAA17077
for <kermit.misc@watsun.cc.columbia.edu>; Wed, 15 Oct 1997 15:21:50 -0400 (EDT)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id PAA18497
for kermit.misc@watsun; Wed, 15 Oct 1997 15:21:50 -0400 (EDT)
Path: news.columbia.edu!panix!news.eecs.umich.edu!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!www.nntp.primenet.com!globalcenter1!news.primenet.com!MIX.COM!sluggy
From: billy@mix.com
Newsgroups: alt.sys.pdp11,vmsnet.pdp-11,comp.protocols.kermit.misc
Subject: Re: DX11 baud rates under RT11
Date: 15 Oct 1997 12:20:00 -0700
Organization: Billy's Place
Lines: 17
Message-ID: <623510$7qn@nntp02.primenet.com>
References: <RJM.97Oct15164024@swift.eng.ox.ac.uk> <6232gg$jnu$1@nntp.ucs.ubc.ca>
X-Posted-By: billy@206.165.6.202 (billy)
Xref: news.columbia.edu alt.sys.pdp11:2863 vmsnet.pdp-11:8362 comp.protocols.kermit.misc:7884
Tim Shoppa <shoppa@alph02.triumf.ca> writes:
> If your board is a DL11 with software-adjustable baud rate in a way
> that's compatible with a DLV-11E, there
> are RT-11 SET commands for changing the baud rate. In this case, I'll
> hazard a guess that you're using RT-11's XL handler to handle this
> port, in which case a SET XL SPEED=nnnn will be doable. 9600 baud
> would be a good start.
XL didn't appear until V5.1 but there is another handler, KM (for
Kermit Modem although in this case modems aren't needed), which I
supply with the KRT Kermit that could be used here. KM also provides
an 8-bit path (XL is a 7-bit handler), hardware flow control (when
used on a port than can do it) and is optimized for Kermit (by not
doing anything beyond what Kermit actually needs).
Billy Y..